TopSaw
TopSaw
  • Видео 801
  • Просмотров 5 613 457
New Style Black Walnut Table #woodworking #furniture
I need a new entertainment center for the new house and want to build an original project that I have never seen before. Some of the constraints on this build is to hold the surround sound speakers and also large coffee-table-style books. I go through the design portion, machining the hand milled lumber and building the entertainment center. How to build furniture overview. Just an Idea for a Black Walnut Entertainment center with hand milled, natural edge lumber.
00:01 Overview of the project, scope of the project
00:22 Machining the lumber, table saw, planer, jointer
03:23 cutting the notches for the shelves
04:35 First dry assembly to see what it looks like
Просмотров: 45

Видео

Flowyline Metal Legs on Walnut Slab
Просмотров 782 дня назад
On Amazon: amzn.to/46K8ToB Black Walnut dining room table that was milled out on a wood Mizer mill. I had a temporary set of wood legs that I always planned to replace and finally got around to ordering some metal legs from Flowyline table legs. Video is receiving, unboxing, and installing the metal legs. Table Legs, Desk Legs (H28) (Only ONE Leg) DIY Steel Furniture Legs, Metal Table Legs for ...
Hand Milled Cedar Outdoor Shade Structure
Просмотров 14014 дней назад
I mill out Redwood and Cedar to build this home-built Pergola or Gazebo. We start with the logs, mill them and use Simpson Strong Ties to fasten the posts down to the concrete. Eight by 8 posts are cut, beams placed on top and frame out the roof. we use 2x decking for the roofing and will put metal roofing over the top. I kept a lot of the natural edge on the wood for a rustic look. 00:01 Logs ...
1972 Toyota Land Cruiser Engine Quality Check #toyota #landcruiser
Просмотров 95Месяц назад
Oil pan gasket replacement and looking at the original cylinder walls and seeing the incredible quality of the metal in this old iron pig. Checking the cylinder walls in a 1972 Toyota Land Cruiser FJ55 and finding the original honing marks.
New Headlights for the Iron Pig, 1972 Toyota FJ 55 Land Cruiser
Просмотров 136Месяц назад
New Headlights for the Iron Pig, 1972 Toyota FJ 55 Land Cruiser
Hand Carved Front Door #construction #woodworking
Просмотров 217Месяц назад
Hand Carved Front Door #construction #woodworking
DEWALT FLEXVOLT 60V MAX Circular Saw, 6-1/2-Inch, Cordless TrackSaw Kit (DCS520T1)
Просмотров 3432 месяца назад
DEWALT FLEXVOLT 60V MAX Circular Saw, 6-1/2-Inch, Cordless TrackSaw Kit (DCS520T1)
Best Coaster Holder Yet, Easy Woodshop Project #wood #woodworking
Просмотров 3162 месяца назад
Best Coaster Holder Yet, Easy Woodshop Project #wood #woodworking
This is a first, outdoor power equipment on Amazon. Husqvarna 320iL Weed Trimmer. Unboxing, Testing
Просмотров 1,4 тыс.2 месяца назад
This is a first, outdoor power equipment on Amazon. Husqvarna 320iL Weed Trimmer. Unboxing, Testing
Last Chance to get a Gas Weed Eater Stihl FS 131 Line Trimmer
Просмотров 2482 месяца назад
Last Chance to get a Gas Weed Eater Stihl FS 131 Line Trimmer
Looking for the Ultimate Woodworking Vac System #woodshop #woodworking
Просмотров 3143 месяца назад
Looking for the Ultimate Woodworking Vac System #woodshop #woodworking
Hand Milled Redwood Golden Gate Bridge with Original Rivets
Просмотров 4663 месяца назад
Hand Milled Redwood Golden Gate Bridge with Original Rivets
Perfect Dados and Grooves Everytime #woodworking #woodshop
Просмотров 1,4 тыс.4 месяца назад
Perfect Dados and Grooves Everytime #woodworking #woodshop
Oregon Speedcut Nano, New Bar, Chain, and Sprocket Install
Просмотров 1734 месяца назад
Oregon Speedcut Nano, New Bar, Chain, and Sprocket Install
TMC Top Mount Cutter, Cutting grooves has never been easier #woodworking #woodshop #router
Просмотров 1,2 тыс.4 месяца назад
TMC Top Mount Cutter, Cutting grooves has never been easier #woodworking #woodshop #router
Artisan Crafted Front Door, New House Construction #woodworking #woodwork
Просмотров 4464 месяца назад
Artisan Crafted Front Door, New House Construction #woodworking #woodwork
How To Cut Glass for a Wooden Picture Frame
Просмотров 1365 месяцев назад
How To Cut Glass for a Wooden Picture Frame
How to Use the Trace with the Shaper Origin for Original Engraves
Просмотров 3305 месяцев назад
How to Use the Trace with the Shaper Origin for Original Engraves
Powermatic PM2244 Drum Sander, Unboxing, Set Up Test, and review
Просмотров 5286 месяцев назад
Powermatic PM2244 Drum Sander, Unboxing, Set Up Test, and review
Stationary Power Tool Identification in the Woodshop
Просмотров 6236 месяцев назад
Stationary Power Tool Identification in the Woodshop
How To Get Started in V Carve, Making a Name Sign #CNC #woodworking
Просмотров 1407 месяцев назад
How To Get Started in V Carve, Making a Name Sign #CNC #woodworking
New Vermont Casting Encore Wood Stove, Install and First Use
Просмотров 4,4 тыс.7 месяцев назад
New Vermont Casting Encore Wood Stove, Install and First Use
Festool TS75 EQ Track saw on 3 inch Walnut Slab
Просмотров 9757 месяцев назад
Festool TS75 EQ Track saw on 3 inch Walnut Slab
Grizzly Lathe Chuck
Просмотров 3538 месяцев назад
Grizzly Lathe Chuck
Making the redwood corner shelf, Natural edge woodwork
Просмотров 1868 месяцев назад
Making the redwood corner shelf, Natural edge woodwork
Making Lumber from Old Tree Waste, High School Woodshop
Просмотров 3068 месяцев назад
Making Lumber from Old Tree Waste, High School Woodshop
Flatwork, Pouring concrete slabs around the house
Просмотров 3359 месяцев назад
Flatwork, Pouring concrete slabs around the house
Milled Redwood Live Edge Wall Top #construction #woodwork
Просмотров 1119 месяцев назад
Milled Redwood Live Edge Wall Top #construction #woodwork
Siding a New House with Hand Milled Lumber
Просмотров 20310 месяцев назад
Siding a New House with Hand Milled Lumber
Different Firewood, 12 types of firewood
Просмотров 3 тыс.10 месяцев назад
Different Firewood, 12 types of firewood

Комментарии

  • @quixo100
    @quixo100 2 дня назад

    WHAT SIZE IS THE MOST IMPORTANT PART

  • @mikej238
    @mikej238 4 дня назад

    Someone needs a winter driving lesson

    • @topsaw
      @topsaw 4 дня назад

      Yes they do

  • @davidgraham2673
    @davidgraham2673 5 дней назад

    I like this adjustment. It's solid too, once you set it.

    • @topsaw
      @topsaw 5 дней назад

      Good feedback

  • @Konopia4Fun
    @Konopia4Fun 5 дней назад

    No one can convince me hes not a Donald Trump!

  • @user-mq3vo3tq3c
    @user-mq3vo3tq3c 6 дней назад

    هذا أقوا من كل جديد ماشاء الله

    • @topsaw
      @topsaw 6 дней назад

      Yes indeed

  • @AlistairArbour-qi3xp
    @AlistairArbour-qi3xp 7 дней назад

    Get some winter tires

    • @topsaw
      @topsaw 7 дней назад

      Great idea, I'll do that

  • @firewoodsteel
    @firewoodsteel 7 дней назад

    No need to put the wood in a kiln? Since I had a small project I once tryed putting the wood in a vacuum and got it so dry it shrunk.

    • @topsaw
      @topsaw 7 дней назад

      We air dry it

  • @cosminantonie6221
    @cosminantonie6221 9 дней назад

    yall got cash for a prime but not 4 winter tyres 😂😂😂😂😂

    • @topsaw
      @topsaw 8 дней назад

      I have winter tires now

  • @Feksrocks21
    @Feksrocks21 10 дней назад

    Got these and the left side stopped working a couple months after I got them

    • @topsaw
      @topsaw 10 дней назад

      Good feedback

  • @petercrocker2421
    @petercrocker2421 11 дней назад

    Maybe get some actual winter tires

  • @jdksynthetics
    @jdksynthetics 11 дней назад

    Perfect length video.

    • @topsaw
      @topsaw 11 дней назад

      Thank you

  • @Manchessollte421
    @Manchessollte421 14 дней назад

    REALLY helpful, exam is today, wish me luck!

    • @topsaw
      @topsaw 13 дней назад

      Good luck

  • @shyloemcpherson3212
    @shyloemcpherson3212 14 дней назад

    Did he ever make it? Poor guy

    • @topsaw
      @topsaw 14 дней назад

      Yes, he finally made it up

  • @kaydenweeks5685
    @kaydenweeks5685 14 дней назад

    Thank you so much bro

    • @topsaw
      @topsaw 14 дней назад

      Thank you

  • @murraychadwick9362
    @murraychadwick9362 14 дней назад

    I have both generators. The regular 8750 generator was great until it died. I purchased the 8759 inverter generator. It could not handle the power load of my all electrical mobile home. I had to turn off my electric water heater and not use my electric stove. It only lasted me one use and quit producing power.. I have learned by talking to Harbor freight that this is not uncommon..The inverter went bad. Now I have a new looking inverter generator that produces no power. The inverter generator cost $1,100.. The inverter part to fix it cost $400. The inverter generator DID get better gas mileage but power wise could not compete with the regular 8750 generator. Keep that in mind if you have an electric hot water heater, electric oven and stove top, microwave, and electric furnace. Anything that has a heating element and produces heat it is too much for the 8750 inverter generator. If you try to uses the things i just mentioned the inverter will go out and it will be worthless.. I learned $1,100 lesson.. I bought the inverter generator because they were out of the regular generator and was told it was as good as the regular generator. That is NOT TRUE. The circut module WILL GO OUT ON YOU. It cost $400 for the replacement inverter to fix it .

    • @topsaw
      @topsaw 14 дней назад

      Good feedback

    • @murraychadwick9362
      @murraychadwick9362 14 дней назад

      Thank you 👍. When I purchased the Predator 8750 inverter generator they were out of the regular 8750 generators which is what I had intentions of buying again. The salesman told me the Predator 8750 inverter was as good or better than the regular Predator 8750 generator..It wasn't. It could not handle the same load.

  • @limeallens6160
    @limeallens6160 14 дней назад

    I never even noticed that little ring but then again I’ve only used this tool a few times

    • @topsaw
      @topsaw 14 дней назад

      It's nice for fine adjustments

  • @Hecksnaw
    @Hecksnaw 16 дней назад

    Damn yall pretty lucky If we got a pump we pouring 3/4 houses then grading garages and setting up all of the porches and patios

    • @topsaw
      @topsaw 16 дней назад

      Hard work

  • @STXBARNES-fi7ho
    @STXBARNES-fi7ho 17 дней назад

    Look into the pin nailer too. Great for putting really small projects together. I have the pin nailer, brad, and the finish. Love them all.

    • @topsaw
      @topsaw 16 дней назад

      Good advice

  • @aaronfarmer9675
    @aaronfarmer9675 18 дней назад

    love it

    • @topsaw
      @topsaw 18 дней назад

      Glad to hear it

  • @wmsymonds810
    @wmsymonds810 18 дней назад

    I like your video I could almost smell the cedar!❤

    • @topsaw
      @topsaw 18 дней назад

      Thank you

  • @ronkay1573
    @ronkay1573 19 дней назад

    Best video I’ve seen spooling this model. Thanks

    • @topsaw
      @topsaw 18 дней назад

      Good to hear, thank you

  • @grandpadaze
    @grandpadaze 19 дней назад

    Do you get any snipe on the leading edge? I have a Jet 16-36 and I cant get rid of it so I run a sacrificial board first.

    • @topsaw
      @topsaw 19 дней назад

      Sometimes when it is slightly out of alignment or if pushing hard down on the back of the board

    • @grandpadaze
      @grandpadaze 18 дней назад

      @@topsaw Most of the wood I sand is about 8" long.

    • @topsaw
      @topsaw 15 дней назад

      @@grandpadaze maybe try double sided tape and tape it down to a longer board

  • @newtoro1
    @newtoro1 19 дней назад

    Nice. Thanks for the word about the lifetime guarantee on the cartridges.

    • @topsaw
      @topsaw 19 дней назад

      Glad it helped

  • @michaelcarver540
    @michaelcarver540 19 дней назад

    I had an old one and i loved it

    • @topsaw
      @topsaw 19 дней назад

      Nice

  • @1982MAC
    @1982MAC 19 дней назад

    No mask? Bold move.

    • @topsaw
      @topsaw 19 дней назад

      I have a pretty good vac system hooked up

  • @hudaverdiagalday8228
    @hudaverdiagalday8228 20 дней назад

    Türkçe altyazı olsa ıyi olur teşekürler

    • @topsaw
      @topsaw 20 дней назад

      Not quite sure how to put subtitles in Turkish on the video

  • @VictorLaforme
    @VictorLaforme 22 дня назад

    Thank you so much

    • @topsaw
      @topsaw 22 дня назад

      Thank you

  • @chadlee7100
    @chadlee7100 22 дня назад

    The third one is definitely not live oak.

  • @ken-e-ken
    @ken-e-ken 23 дня назад

    I can appreciate having to do a video solo (with no camera person) and only one camera, but this video could have really benefitted from an overhead shot down into the blade so we could see all the action.

    • @topsaw
      @topsaw 23 дня назад

      Thank you for the feedback, I'll work on that next time

  • @stanislavm6325
    @stanislavm6325 24 дня назад

    About to install some fence myself and came accross this video that left me with few questions. Why do you drive and dig holes for postmaster posts ? Can't you just drive them ? Ones I found in HD and lowes are 8 ft so I'm planning to drive 2 feet without digging. Also distance between top of the picket and top rail is over 6 inches and I heard it tends to warp. Is yours still holding straight ? And thanks for sharing this vid.

    • @topsaw
      @topsaw 24 дня назад

      Digging and concrete make them more sturdy. Still holding strong. Yes don't want the tops too far from the top rail

  • @shawngallagher8764
    @shawngallagher8764 24 дня назад

    Well after watching this I’m REALLY trying not to lose hope. I definitely have ADD so if I keep losing focus on a subject I struggle with already and can’t retain information I’m screwed

    • @topsaw
      @topsaw 24 дня назад

      Keep studying and practicing, good luck

  • @shubhshah7258
    @shubhshah7258 25 дней назад

    Would this mess up the rear truck sensor?

    • @topsaw
      @topsaw 25 дней назад

      It didn't on mine

  • @conditionsunknown9384
    @conditionsunknown9384 25 дней назад

    The kids simply broke the trigger mechanism by aggressively trying to hit both trigger and safety button at the same time i guarantee ! Id bet my last dollar thats a 20 minute fix . Kids shouldnt have access to a Kapex . Does your drivers ed department have porches for the kids to drive ? A Kapex in a high school work shop is an ignorant decision !!

    • @topsaw
      @topsaw 25 дней назад

      Ok

    • @topsaw
      @topsaw 25 дней назад

      Actually there are no more drivers Ed classes in high school just like there are barely any high school woodshops left unless you are able to get grants to fund them which I have and why I have the Festool but thanks for the insight

  • @TheRealWilsonn
    @TheRealWilsonn 27 дней назад

    And how do you do the inside?

    • @topsaw
      @topsaw 27 дней назад

      Regular sanding

  • @bryanweitzel554
    @bryanweitzel554 Месяц назад

    What brand is the 2" hitch, and should it work on a 2024 Rav4 Prime?

    • @topsaw
      @topsaw Месяц назад

      I have it on my Rav 4 Prime

  • @fsam48
    @fsam48 Месяц назад

    Take care of your engine, and it will take care of you. Chevron lubricants do the job.

    • @topsaw
      @topsaw Месяц назад

      Very true, only Chevron lubricants in its 52 years of life

  • @EwenMackenzie
    @EwenMackenzie Месяц назад

    this is a video I was looking for! Simple unboxing and explanation and real life scenarios while trimming. I cannot thank you enough

    • @topsaw
      @topsaw Месяц назад

      Great to hear thank you

  • @pwayne3580
    @pwayne3580 Месяц назад

    The F engine. Notorious for being too dumb to die.

    • @topsaw
      @topsaw Месяц назад

      This one is still going strong

  • @HammerTime-y9r
    @HammerTime-y9r Месяц назад

    50 more years!

    • @topsaw
      @topsaw Месяц назад

      I think it might have another 50

  • @danielfurr5409
    @danielfurr5409 Месяц назад

    Which is better for trimming around trees, the house etc? Does the bullhorns make it hard to manipulate the weedeater to certain angles?

    • @topsaw
      @topsaw Месяц назад

      Smaller one is much better for around the house. Only need the big one if you have acreage

    • @danielfurr5409
      @danielfurr5409 Месяц назад

      @@topsaw I have 12 acres but don't plan on using weedeater but on 1acres. And that acre has about 50 trees and house on it to trim etc. There are some very large brush areas though... will the 91 take a brush blade ?

    • @topsaw
      @topsaw Месяц назад

      @@danielfurr5409 yes but a little under powered for a brush blade

  • @tonyvu9366
    @tonyvu9366 Месяц назад

    get some proper tires

  • @bootasingh6342
    @bootasingh6342 Месяц назад

    Halftime mane pleg

  • @etorres77
    @etorres77 Месяц назад

    Thank you for this video. I hope I can drive my 24ft food truck

    • @topsaw
      @topsaw Месяц назад

      Good luck

  • @IsaacMartinez-ly7dl
    @IsaacMartinez-ly7dl Месяц назад

    Does this apply to the kenexa exam ?

    • @topsaw
      @topsaw Месяц назад

      I'm not sure, the more math you know the better you will do

  • @paulmanhart4481
    @paulmanhart4481 Месяц назад

    How do you adjust the tilt of the fence? Thanks.

    • @topsaw
      @topsaw Месяц назад

      There is a release on the back and a lever

  • @cryptosforwife2300
    @cryptosforwife2300 Месяц назад

    I thought this was a trailer

    • @topsaw
      @topsaw Месяц назад

      It is

  • @M.KWWZ6226
    @M.KWWZ6226 Месяц назад

    😂😂😂, you need winter wheels

    • @topsaw
      @topsaw Месяц назад

      Yes indeed

  • @CougarLand
    @CougarLand Месяц назад

    ...just curious...why would you need a 25 inch bar for cutting branches at the top of a tree?

    • @topsaw
      @topsaw Месяц назад

      Taking the top off

  • @user-ik6ri5pt1f
    @user-ik6ri5pt1f Месяц назад

    What type of jacks?

    • @topsaw
      @topsaw Месяц назад

      We rented them, I can't remember the type

  • @user-vc2yy1xe5y
    @user-vc2yy1xe5y Месяц назад

    thanks for doing the problems and answers this should help

    • @topsaw
      @topsaw Месяц назад

      Good luck